Setting Device Owner Mode Using QR Code
Supported OS: android.icon
Some devices do not support device owner mode settings using QR codes.
1. Prepare a pre-activation device with Android 7.0 or later. Initialize the device if it is already in use.
The battery level of the device to be set must be 90% or more. When encrypting the device (Later), the device must have at least 90% battery level and be connected to a power source.
2. Tap the language setting screen six times in a row.
https://gyazo.com/98dad8c5bc7c593f6ff9480bfbf0745b
3. The QR code setup screen appears. Tap NEXT.
https://gyazo.com/165abdc89e133d6d711717c04e98f47c
4. Chose a wi-fi network and installation of QR code reader starts.
5. When the QR code reader starts up, read the following QR code for setting.
https://gyazo.com/3569104a3a0e82c8a2f293486f2c4173
6. Select available Wi-Fi access point and enter the password.
7. Follow the instruction for setup.
8. Tap NEXT button when BizGo! MDM app opens
https://gyazo.com/ebb95b822dc59247dac7cc03e3bece48
9. Input Key and Code to enroll to BizMobile Go!.
Tap ENROLL BY QR CODE to use QR code enrollment.
https://gyazo.com/34142a47ee0d7f1c4fbf1a4f9e1fe8fa
10. Check Managed by unit is your unit name and managed type is Device Owner.
https://gyazo.com/b6ed2194394a32be84e84adc469defd5
? Setting Device Owner Mode Using QR Code